fbpx

New Arrival – High Speed Vertical Machining Center

New Arrival – High Speed Vertical Machining Center
New Arrival – High Speed Vertical Machining Center2024-08-01T14:05:10-08:00

KVP Vertical Machining Center Series

Product Highlights

The high-speed, high precision KENT USA® KVP Vertical Machining Center integrates proven machine design with cutting-edge control and manufacturing technology. Renowned for their reliability and stability, these machines are a top choice for demanding job shops and in-house production facilities. The robust machine body structure ensures higher turning efficiency, superior finishes, and longer tool life, significantly enhancing productivity and profitability.

  • Fanuc 0i-MF Plus

  • 10.4″ LCD

  • 15,000 rpm (Direct-drive)

  • 20HP spindle (ceramic bearings)

  • CAT-40 Dual contact

  • Spindle oil cooler

  • 300psi coolant through spindle

  • High/low gear function

  • 30 tool capacity fast ATC

  • Chain type chip conveyor

  • Chip tank

  • Shower coolant

  • 208/220 volt x 3 phase

Request Quote
ITEM / MODEL KVP-10
Travels
Longitudinal Travel X-Axis 40.2″
Cross Travel Y-Axis 20.1″
Vertical Travel Z-Axis 23.6″
Table to Spindle 3.94″ min/27.5″ max
Spindle Center to Column 21″
Table
Table Working Surface 42″ x 20.1″
Max. Workload on Table 1,100 lbs.
Table Surface Ground/ T-slotted
No. of T-slots x Width 5 x 18 mm
Table Height from Floor 35.4″
Spindle (standard)
Spindle Motor 20 HP
Spindle Taper CAT-40 Dual Contact
Spindle Drive System Direct Drive Motor
Spindle Speed 0 – 15,000 RPM
Spindle Bearings Ceramic
Automatic Tool Changer (Arm-Type)
Number of Tools 30
Tool Selection Bi-directional-Random
Tool Change Time 2.0 Seconds Tool to Tool
Max. Tool Diameter 3″ with Adjacent Tools (6″ w/o)
Max. Tool Weight 15 lbs.
Tool Type CAT-40
Max. Tool Length 10″
Ballscrews and Axis Motors
X-Y-Z Ballscrew Diameter 36 mm (1.4″)
Ballscrew Type Class 3 Double-Nut Pre-loaded
Ballscrew Mounting Type Pre-tensioned
X-Y-Z Servo Motor 3.0 – 3.0 – 4.0 HP
Servo Motor Mounting Direct Coupled
Feeds
Rapid Traverse Rate X, Y, Z 1,417 ipm
Acceleration X, Y, Z 0.7G
Cutting Feed Rate 0.01 – 394 IPM
Positioning Accuracy ± .0002″ Full Stroke
Repeatability ± .0001″
General
Coolant Tank Capacity 75 Gallons
Machine Weight 11,700 lbs.
Floor Space 128″ x 90″ x 110″
Machine Power Source 208/220 Volts, 3 Phase, 75 Amps
Air Source 90 PSI
  • Fanuc 0i-MF Plus control
  • High quality direct-drive spindle and high rigidity structure design
  • CAT-40 Big Plus spindle, supports dual contact tool holder
  • Excellent precision and cutting capability
  • General purpose model
  • Suitable for all types of processing industries
  • High cost performance value
  • X, Y, and Z axis travels : 40.2″ x 20.1″ x 23.6″ (1021 mm x 510 mm x 600 mm)
  • Meehanite FC-30 castings
  • 37″ wide linear ways on all axes.
  • Ø1.4″ pre-tensioned ballscrews direct-coupled to high power servo motors
  • 1,890 ipm rapids in the X and Y axes and 1,417 ipm in the Z-axis.
  • Acceleration in X, Y, and Z is 1.18G, 1.0G, 0.7G respectively.
  • 20 HP direct drive spindle w/ a dual contact (Big Plus) 40 taper
  • Spindle is oil cooled for thermal stability.
  • High/low switch gear provides an adjustable range of power and torque.
  • Ø2.75″ spindle shaft with six bearings
  • 30-tool high-speed synchronous arm-type automatic tool changer provides
  • 0-second tool changes with average chip to chip time of 3.6 seconds.
  • High pressure through-spindle coolant and 300 psi coolant pumps
Request Quote

Brochures

Request Quote