KMT-800-5AX 5-Axis Milling and Turning Center
Milling and Turning Combined in a Single Setup
The KMT-800-5AX is a high-performance 5-axis milling and turning center engineered to deliver exceptional rigidity, precision, and flexibility. Featuring a specially designed closed-type rigid block structure, this machine integrates milling and turning operations into one seamless setup—significantly reducing setup time while expanding machining capabilities beyond conventional mill-turn solutions.
Built for demanding, high-speed, multi-axis applications, the KMT-800-5AX enables manufacturers to machine complex, high-precision parts with confidence and efficiency.
Product Highlights
-
Closed-Type Rigid Block Structure
Optimized for 5-axis high-speed machining, delivering outstanding structural stability and vibration resistance.
-
45° Vertical/Horizontal Swiveling Head
Supports both vertical and horizontal machining, greatly increasing application flexibility.
-
True 5-Axis Simultaneous Machining
Complex, multi-surface parts can be completed in a single setup, improving accuracy and reducing lead time.
-
Integrated Milling & Turning Capability
Vertical/horizontal milling head (A-axis) combined with a high-precision rotary table (C-axis) enables seamless mill-turn operations.
-
High-Speed Built-In Spindle
12,000 rpm HSK-T63 built-in spindle ensures high torque, excellent surface finish, and long-term reliability.
-
Direct-Drive High-Precision Rotary Table
Positioning accuracy of 5 seconds and repeatability of 2 seconds for superior rotational precision.
-
Roller-Type Linear Guideways on X / Y / Z Axes
Designed for high load capacity, rigidity, and long service life.
-
Triple Linear Guideways on Y-Axis
Enhanced support for the spindle head, delivering superior cutting stability.
-
Full Closed-Loop Control
Linear scales on X / Y / Z axes ensure high positioning accuracy and consistent machining precision.
Sample Parts
12,000 RPM | HSK-T63
The built-in high-speed spindle with a 45° vertical/horizontal rotary head enables flexible machining in both orientations. Combined with full 5-axis simultaneous control, the KMT-800-5AX allows complex geometries to be completed in a single machine cycle.
Spindle Specifications:
-
Maximum spindle speed: 12,000 rpm
-
Spindle motor power: 24 / 18.5 kW (40% / 100%)
-
Spindle taper: HSK-T63
-
Torque output: 81 / 61.8 Nm (40% / 100%)
-
Spindle bearing inner diameter: Ø70 mm
5-Axis Milling & Turning CNC Applications
The KMT-800-5AX is ideally suited for industries requiring high precision and complex geometries, including:
-
Aerospace
-
Automotive
-
Medical devices
-
Consumer products
-
Precision mold and die manufacturing
Advantages of 5-Axis Machining
-
Complex Geometries
Easily produces intricate curves, undercuts, and free-form surfaces beyond the limits of traditional machining.
-
Faster Production
Reduced setups and fewer fixture changes significantly shorten cycle times and speed up time-to-market.
-
Higher Precision & Surface Quality
Achieves tight tolerances and superior surface finishes through advanced multi-axis control.
-
Material Versatility
Capable of machining a wide range of materials, including difficult-to-cut alloys.
-
Innovation Enablement
Empowers designers and engineers to realize advanced designs that were previously impractical or impossible.
| Axis | X | Y | Z |
|---|---|---|---|
| 3-Axis Travel | 39.37 in (1000 mm) | 39.37 in (1000 mm) | 39.37 in (1000 mm) |
| Cutting Feed Rate | 1,181 in/min (30 m/min) | 1,181 in/min (30 m/min) | 1,181 in/min (30 m/min) |
| Rapid Feed Rate | 1,181 in/min (30 m/min) | 1,181 in/min (30 m/min) | 1,181 in/min (30 m/min) |
| Specification | |
|---|---|
| Table Area | Ø31.50 in (Ø800 mm) |
| T-slot Area | No. 5, width 0.71 / 5.12 in (No. 5, width 18 / 130 mm) |
| Height from Table Surface to Spindle Nose | 37.40 in (950 mm) |
| Distance from Table Surface to Spindle Nose | Horiz.: 1.97–41.34 in (50–1050 mm) / Vert.: 2.76–42.13 in (70–1070 mm) |
| Max. Load of Table (Average Load) | 6,614 lb (3000 kg) |
| Max. Workpiece Sizes | Ø39.37 in (Ø1000 mm) |
| Spindle Type | Built-in Type |
| Max. Spindle Speed | 12,000 rpm (D.D) |
| Bearing Lubrication | Grease |
| Spindle Cooling | Oil-cooling |
| Inner Diameter of Spindle Bearing | Ø2.76 in (Ø70 mm) |
| ATC Capacity | 40T |
| ATC Tool System | HSK-T63 |
| Max. Tool Diameter | Ø2.95 in (Ø75 mm) |
| Max. Tool Length | 11.81 in (300 mm) |
| Max. Tool Weight | 17.64 lb (8 kg) |
| Controller | HEIDENHAIN / SIEMENS |
| Air Pressure Required | 101.5 psi (7 bar) |
| Coolant Tank Capacity | 124.2 gal (470 L) |
| Machine Net Weight | 41,888 lb (19,000 kg) |
| Machine Gross Weight | 48,105 lb (21,820 kg) |
| Machine Dimensions (L × W × H) | 198.82 × 124.21 × 150.67 in (5050 × 3155 × 3827 mm) |
Standard Accessories
|
Optional Accessories
|
